1UZ-FE Supra Project Parts List
I have attached the official 1UZ-FE Supra Project Parts List in PDF format. This file may be updated often and without notice; the web site, its affiliates, and its owners shall not be held liable for any mistakes within the document, nor personal injuries and property damages, be it personal or private, caused through the use, application of or lack of use or application of this information.
1UZ-FE Supra Project Parts List is licensed under a Creative Commons Attribution-Noncommercial-Share Alike 3.0 United States License.
Based on a work at 1uzsupra.com.
What do I need just to attach the Fuel Lines and the Power Steering Lines?
I swapped out my connectors on the fuel feed and return lines for AN fittings and the power steering lines I converted to JIC fittings. I have the AN fittings and line sizes documented and plenty of pics of the JIC fittings which I had a local shop put together for me. If I were to do the PS fittings over again, I’d just do AN fittings so I could standardize on one type of fitting for all of my fluid connections. I’ll see if I can dig up the details for you and repost here.
I apologize for the long delay in getting these sizes posted up. After I read my parts list (also posted on this site) I found I forgot to record where each size was used. I won’t make it out to the garage to get measurements on the connectors until after 8/18/2013. Thanks for your patience.
After an extremely long delay, an oversight on my part and life happened, the fuel lines are -6AN (3/8″) and the power steering lines are also -6 but in NPT not JIC like I had thought (original shop, now closed, did not understand my request apparently and I was in too much of a hurry at the time to really have it corrected. At some point in the future, the lines will be switched over to AN fittings to standardize on one type of fitting as mentioned previously.